FXS BUSY TONE

Unanswered Question
Dec 23rd, 2007
User Badges:

In my solution I have a 2 ports FXS VIC in 1751 router connecting through WAN to a 2 Ports FXO VIC in 1751 router , The system was working fine ,till the only ONE of the FXS ports started to give us a busy tone


what could be happened to make this situation?


could be this a result for a physical damage ?


this is the configuration for both routers , is there is any thing missed ?


Router 1 ( FXS ROUTER )


voice-port 2/0

connection plar 6510

!

voice-port 2/1

connection plar 6511

!

dial-peer cor custom

!

!

!

dial-peer voice 1 pots

destination-pattern 801

port 2/0

!

dial-peer voice 2 pots

destination-pattern 802

port 2/1

!

dial-peer voice 100 voip

destination-pattern 6...

session target ipv4:172.16.1.1

codec g711alaw






ROUTER 2 ( FXO ROUTER )


voice-port 2/0

timing hookflash-out 500

connection plar 800

!

voice-port 2/1

timing hookflash-out 500

connection plar 801

!

dial-peer cor custom

!

!

!

dial-peer voice 1 pots

destination-pattern 6510

port 2/0

!

dial-peer voice 800 voip

destination-pattern 8..

session target ipv4:172.16.1.2

codec g711alaw

!

dial-peer voice 2 pots

destination-pattern 6511

port 2/1

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
paolo bevilacqua Sun, 12/23/2007 - 06:12
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

If you reload both routers, does it helps ?

Rob Huffman Sun, 12/23/2007 - 08:03
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Paolo,


Happy Holidays my friend! 5 points to you for all the great work you have done here this year. You are truly a wonderful asset :)


Cheers!

Rob

paolo bevilacqua Sun, 12/23/2007 - 08:29
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi Rob,


I cannot write too many times how the appreciation is mutual, and I'm only returning to the user community, a fraction of the many things I've learned from this forum, and from application and study.


Have you all a great Holiday Season!

ahmedsalahomar Sun, 12/23/2007 - 23:53
User Badges:

Thank you for your replay


Yes I reloaded the routers but it does not work


any other steps.



thotsaphon Mon, 12/24/2007 - 22:20
User Badges:
  • Gold, 750 points or more

Hi ahmed

Could you do "show voice call summary" and "show voice port summary"? please post the outputs here.


HTH

Thot

Actions

This Discussion