FWSM has a lot of Drooped packets on the interface

Unanswered Question
Dec 23rd, 2007

Guys

just found something puzzling on my inside interface ....(MSFC Behind the FWSM ...inside interface is shared with the MSFC) and i noticed a lot of drooped packets on the input interface and its increasing by the millisecond is this normal ?

please i need your inputs on this

regards

FWSM# clear inter

FWSM# sh inter inside

Interface Vlan699 "inside", is up, line protocol is up

Hardware is EtherSVI

Description: INSIDE_Connection_to_MSFC

MAC address 001d.4584.0500, MTU 1500

IP address 10.122.199.1, subnet mask 255.255.255.224

Traffic Statistics for "inside":

27 packets input, 2034 bytes

0 packets output, 0 bytes

22 packets dropped

FWSM# sh inter inside

Interface Vlan699 "inside", is up, line protocol is up

Hardware is EtherSVI

Description: INSIDE_Connection_to_MSFC

MAC address 001d.4584.0500, MTU 1500

IP address 10.122.199.1, subnet mask 255.255.255.224

Traffic Statistics for "inside":

47 packets input, 3326 bytes

1 packets output, 130 bytes

37 packets dropped

FWSM# sh inter inside

Interface Vlan699 "inside", is up, line protocol is up

Hardware is EtherSVI

Description: INSIDE_Connection_to_MSFC

MAC address 001d.4584.0500, MTU 1500

IP address 10.122.199.1, subnet mask 255.255.255.224

Traffic Statistics for "inside":

59 packets input, 4118 bytes

1 packets output, 130 bytes

48 packets dropped

FWSM#

--

Hash!!!

CCIE#16818

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
smahbub Mon, 12/31/2007 - 07:35

This scenario is typically used in the intranet data center. Placing the MSFC outside the Cisco Catalyst 6500 Series Firewall Services Module (FWSM) makes it possible for the MSFC to perform routing toward the core.

http://www.cisco.com/en/US/products/hw/modules/ps2706/products_installation_and_configuration_guides_list.html

http://www.cisco.com/en/US/docs/net_mgmt/ciscoview_device_manager/1.0/user/guide/templ8.html#wp1136144

Actions

This Discussion