12-25-2007 11:50 PM - edited 03-10-2019 03:34 PM
hi can anybody help me? i was configure
easy vpn client authentication and authorization in the radius server RADIUS (Cisco IOS/PIX 6.0)
i do everythink like this document
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800949ba.shtml
authentication and authorization doesn't work
in the acs i can see what group try authenticat but acs say password is invalid but i was certain paswword right
my debug in the attachments
01-02-2008 07:45 AM
Check if you are getting CLID on Radius Accounting-Packet for the VPN Client connection. Following links may help you
http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/ezvpn505.html
http://www.cisco.com/en/US/tech/tk583/tk372/technologies_white_paper09186a00801fdef9.shtml
01-03-2008 06:28 AM
i was chek clid . clid is ok !
i was configured easy vpn in the cisco 3845
01-16-2008 10:13 PM
up
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: