cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
347
Views
0
Helpful
3
Replies

the pix doesn't work at after some days of its configurations

labib-makar
Level 1
Level 1

hello dears and merry christmas to u all, i performed the required configurations of cisco pix 506 and tested the internet connections and found no problems at all for the internet browsing or downloading, but when i leave this pix working for some days the internet connections lost on all the computers and at this time when i replace the pix by normal dsl router i find no problem at all in the internet. this senario happened about three times so i want to know the cause of this case from something wrong on my configurations or on the pix itself (its IOS or hardware) and something like that, i appretiate the urgent response, thanks alot for your help and merry christmas

3 Replies 3

can you post the output of 'sho version'

Hi,

At the time of problem you may check the following things.

1) is the pix pingable at the time this proble occurs.

2) what is the cpu and memory utilization at that time.

3) login to consle and see if pix is in hund state and responding.

4) you can take the output of show tech at that time and paste in output debugger to see if it shows any issues.

Best Regards

Dinesh

(http://knowurtech.com)

Good cisco articles

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card