12-26-2007 12:00 PM - edited 03-05-2019 08:09 PM
Hi,
I just got and configured a Cisco 831 router. The IOS is 12.4. The router is connected to a DSL modem and goes to internet. The problem is, from PC in my LAN, only some web sites can be accessed, like google.com. Some web sites cannot be opened, like weather.com. I tried trace route, the routing goes to the 831 router (the only gateway). I telnet to 80 port of those web sites, and it works.
So I really got no idea what could be wrong. Can you please advise? I attached my running-config.
ANY suggestion will be greatly appreciated!!!
12-26-2007 12:38 PM
Add the following command to your configuration in global config mode:
ip classless
Hope this helps. If so, please rate the post.
Brandon
12-26-2007 01:51 PM
I added "ip classless", but the problem is still there.
Maybe I should clarify the problem a bit more. Say from PC1 in my LAN, do the following tests:
1. In IE, open google.com website, result: Webpage looks good.
2. In IE, open weather.com website, result: Webpage doesn't open.
3. In DOS prompt, do "telnet weather.com 80", get the black screen, means telnet session is established to weather.com's 80 port.
So I'm suspecting something above Layer 4. But it's just my guess, as I got absolutely no clue.
I appreciate your suggestion! :)
12-27-2007 07:56 AM
The following commands fixed the problem.
Thanks to p.bevilacqua!
----------------------
int dialer1
ip tcp adjust-mss 1452
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide