cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
366
Views
0
Helpful
2
Replies

ap-manager Interface Unaccessible

0dstetson
Level 1
Level 1

Hello,

We are installing a WiSM and for some reason the ap-manager interface is not accessible (cannot ping) however the management interface, which is in the same subnet, is accessible. I have tried adding a vlan tag to the ap-manager interface with no success, however, the management interface is accessible if I do not add a vlan tag (no tagging). Attached is the configuration.

Any thoughts or suggestions would be helpful.

2 Replies 2

jcoke
Level 3
Level 3

Remember, native VLAN means that the switch is expecting to receive the native VLAN id *untagged* Your config has the ap-manager interface tagged. Either change the native VLAN to something else (666 is a personal fav.) or untag all the wism interfaces that are going to be on vlan 40.

douhanm
Level 1
Level 1

the AP maanger is always unpingable so there is nothing wrong with that.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: