12-27-2007 02:00 AM - edited 03-05-2019 08:10 PM
Hello
do we need this Config inder the interface vlan 165?
interface Vlan165
description "x-y-z"
ip address x.x.x.x 255.255.255.0
no ip redirects
mls rp vtp-domain Test
mls rp ip
12-27-2007 04:27 AM
The no ip redirects command is used as a secuirty config.
The other commands are used when you do MLS (old switches like the 5500 with RSM or external router. Here we send the first packet to the Layer 3 engine and marks the packet as candidate. when the L3 engine returns the packet and the conditions match, the switch creates a flow and subsequent packets are multilayer switched
http://www.cisco.com/en/US/docs/switches/lan/catalyst5000/hybrid/mls.html
HTH
Narayan
12-27-2007 06:46 AM
10xs Narayan
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide