12-27-2007 03:05 AM - edited 03-15-2019 07:57 AM
Hi,
I've got a 2851 running Unified CME (12.4(15)T1). DHCP is provided by a Linux based server. I've configured the clock correctly on the 2851 as far as I can tell:
service timestamps debug datetime localtime
service timestamps log datetime localtime
clock timezone AEST 10
clock summer-time AEDST recurring last Sun Oct 2:00 last Sun Mar 3:00
And under telephony-service I have
time-zone 48
However my phones still seem to display GMT. Is there something else I'm supposed to be doing here? My logs seem to be in the correct time format with the localtime keyword.
Thanks,
Tristan
12-27-2007 03:10 AM
Which phones do you have? And which FW on the phones ?
12-27-2007 03:41 AM
Hi,
I am using the 7971G-GE, 7961G-GE and 7941G phones. 8.3.2SR1 on my 7971G-GE. I could check the others however I am convinced that there is something I am missing with my configuration - is this configured on the phones themselves perhaps? They are showing a time (and date) 11 hours behind, which is GMT.
12-27-2007 04:14 AM
Hi,
8.3.x FW is riddled with bugs.
Can you try the FW 8.2(2)SR1S recommended by cisco?
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme41spc.htm
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide