CatOS Config Register? 0x10F or 0x2102

Answered Question
Dec 27th, 2007

Guys,

Am I correct in saying the following for CatOS:

0x10F does the following

Switch to boot image from specified file. - If specified file is not there? does it just go into rommon mode?

Baud = 9600

Ignore config = disabled?

and

0x2102 does the following

uses the first file in flash? = what part of flash ?? If no file in flash? then use boot env?

Baud = 9600

Ignore config = disabled?

Could someone just clarify these points for me :

0x10f

If specified file is not there? does it just go into rommon mode?

0x2102

uses the first file in flash? = what part of flash ??

Many thx indeed, and Merry Christmas to all.

Ken

I have this problem too.
0 votes
Correct Answer by Edison Ortiz about 8 years 11 months ago

With CatOS, it's recommended that you enter a word option:rommon | bootflash | system

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/catos/6.x/configuration/guide/boot.html#wp1020006

This URL is also useful on understating IOS values:

http://www.cisco.com/en/US/products/hw/routers/ps133/products_tech_note09186a008022493f.shtml

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
kfarrington Thu, 12/27/2007 - 07:36

thx for that.

Just gonna sit down and work it out. its been such a long time :))))

Many thx

Ken

kfarrington Thu, 12/27/2007 - 07:38

also, can I just confirm that CatOS is exactly the same as IOS for config-reg settings?

Thx

Ken

Actions

This Discussion