Compatability issues 1242 and 1231

Unanswered Question
Dec 27th, 2007

Has anyone had any client compatability issues when mixing 1242 and 1231 AP's within the same site? My older Symbol clients are freezing up etc when roaming to the 1242's while new clients are fine roaming within both flavors of AP's. The configs are indentical, both running in autonomous mode, etc.

Suggestions welcome.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
cchandler63 Mon, 12/31/2007 - 10:05

I guess I'll reply to my own thread just to post what I've learned over the past few days in case it helps anyone else. A driver upgrade (actually the entire platform) on the MC9060's fixed their connectivity issues.

My Zebra QL420 printers remain a problem. At this point we are considering an upgrade to the QL420 plus.

Cisco confirmed the 1242's are using a different radio and chipset than the 1231's. All the suggestions made by Cisco to turn off G data rates, disable aironet extensions, had no real effect on getting the printers to work with the 1242's. We did retain the WPA handshake timeout setting of 500.

The zebra printers seem fairly cantankerous in the LWAP environment as well, but that is another thread.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode