Cannot assign route-map to vlan interface on 3750

Unanswered Question
Dec 27th, 2007
User Badges:

Version 12.2(25)SEE4

IPSERVICES



access-list 100 permit ip 10.23.10.0 0.0.0.255 any

route-map rm permit 10

match ip address 100

set ip next-hop 10.23.7.1

!



c3750-01-core#conf term

Enter configuration commands, one per line. End with CNTL/Z.

c3750-01-core(config)#int vlan14

c3750-01-core(config-if)#ip policy route-map rm

c3750-01-core(config-if)#^Z

c3750-01-core#sho run int vlan14

Building configuration...


Current configuration : 239 bytes

!

interface Vlan14

ip address 10.23.11.1 255.255.255.0 secondary

ip address 10.23.12.1 255.255.255.0 secondary

ip address 10.23.10.1 255.255.255.0

end


WTF??? where is route-map?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
royalblues Thu, 12/27/2007 - 23:59
User Badges:
  • Green, 3000 points or more

What is the SDM template you are running on the switch? By default the switch runs desktop default template which can be verified using " SH SDM PREFER"


You would require an SDM routing template for PBR support. You would require a reboot to take the new setting into effect


http://www.ciscosystems.cd/en/US/products/hw/switches/ps5023/products_configuration_guide_chapter09186a00808c73cc.html


HTH

Narayan




ctalaski Wed, 01/02/2008 - 08:25
User Badges:

I've had similar experiences and contacted Cisco to ask about this... I was informed that I would need to upgrade my IOS to "Advanced IP SERVICES" version in order to get this feature.



Actions

This Discussion