spanning-tree portfast bpduguard default

Answered Question
Dec 28th, 2007

Hi NetPro,

just have a quick check , with this command will only apply to Access switch only ? or deploy to Core-switches , Distribution switches ?

your reply will be highly appreciated.

thanks.

regards,

Jackal

I have this problem too.
0 votes
Correct Answer by royalblues about 9 years 4 weeks ago

The command is configurable on any switch but in practice will be genrally configured on the access switches.

The Core/distribution switches would mostly carry only trunk uplinks or L3 routed ports and hence it is not configured

HTH

Narayan

Correct Answer by Fraser Reid about 9 years 4 weeks ago

Quick guess - access ports only.....

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.7 (3 ratings)
Loading.
Correct Answer
royalblues Fri, 12/28/2007 - 06:27

The command is configurable on any switch but in practice will be genrally configured on the access switches.

The Core/distribution switches would mostly carry only trunk uplinks or L3 routed ports and hence it is not configured

HTH

Narayan

bvsnarayana03 Fri, 12/28/2007 - 06:48

Portfast is generally enabled on all ports to which the enduser desktops are connected.

Access switches are generally meant for that. So mainly on access switches or any desktop connected ports.

Actions

This Discussion