CCM 5.1 and fxo direct lines

Unanswered Question
Dec 30th, 2007
User Badges:

i have cisco call manager connected to the gateway 2851 that contains 28 fxo.

Some of ip phones must have inboud and outbound calls but via one direct line.


how can i configure it in the CCM and voice gateway ??


thanks at advance.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Sun, 12/30/2007 - 08:59
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Do you use H.323 or MGCP to the GW ?

paolo bevilacqua Sun, 12/30/2007 - 09:14
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

For incoming, configure "connection plar XXX opx" where XXX is the extension where you want the call to be sent.


For outgoing, follow the configuration detailed at:

http://cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml


Hope this helps, please rate post if it does!

dbenattou Sun, 12/30/2007 - 09:33
User Badges:

thanks a lot for your help.


i will test it tomorrow and i will answer you


Thanks again.

Actions

This Discussion