cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
13283
Views
0
Helpful
6
Replies

boot: cannot determine first file name on device "flash"

rijperwaard
Level 1
Level 1

I have Cisco 837. By accident the ios image is erased. I guess that the only solution is: using xmodem to upload the ios to the flash. Could someone tell me how to do that? Is it possible to do it by using Hyperterminal and how?

Thanks in advanced.

Peter

6 Replies 6

Jon Marshall
Hall of Fame
Hall of Fame

Hi Peter

Please see the 2 attached links which should guide you through the procedure

1) Xmodem using hyperterm

http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008015bfac.shtml

2) Specific info for 800 series routers

http://www.cisco.com/en/US/docs/routers/access/800/820/software/configuration/guide/rommon.html

Please come back if you need further help.

Jon

Dear Jon,

I have tried with the option 1 just like in the document explained how to restore ios for 1603 router. I got the answer back that the Xmodem doesn't react. I only use xmodem protocol inside Hyper Termninal to try to restore ios. Is it enough or i need a special Xmodem software?

Option2:

Where can i enter the command:

IP_ADDRESS= ip_address etc.

The IOS does not exist anymore. It goes straight to the Rom Monitor by booting.

Thanks,

Peter

Peter

You should be able to enter these variables from Rom monitor mode ie.

rommon > IP_ADDRESS=192.168.5.1 (assuming 192.168.5.1 is your tftp server)

etc..

If you can't do this try to use the console section of the second doc

http://www.cisco.com/en/US/docs/routers/access/800/820/software/configuration/guide/rommon.html#wp1020810

Jon

Thanks a lot, Jon.

The router is "alive" again.

Peter

Peter

No problem, glad to have helped and thanks for letting me know you have fixed it.

Jon

tftpdnld is an easier method as compared to xmodem. The second link given by Jon is really helpful.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: