QOS question

Unanswered Question
Jan 3rd, 2008

Hi we make use of class-based QOS on our access switches interfaces.

When I do the following command I get a puzzling reply, in the below output you can see that NO traffic is being registered by the access-lists and class-maps, is this normal behaviour?

command: show policy-map interface fa0/1

FastEthernet0/1

Service-policy input: ax-qos

Class-map: voip-traffic (match-all)

0 packets, 0 bytes

offered rate 0 bps, drop rate 0 bps

Match: access-group name ax-qos_voip-traffic

Class-map: voip-signaling (match-all)

0 packets, 0 bytes

offered rate 0 bps, drop rate 0 bps

Match: access-group name ax-qos_voip-signaling

Class-map: voip-any (match-all)

0 packets, 0 bytes

offered rate 0 bps, drop rate 0 bps

Match: access-group name ax-qos_voip-any

Class-map: citrix (match-any)

0 packets, 0 bytes

offered rate 0 bps, drop rate 0 bps

Match: access-group name ax-qos_citrix

0 packets, 0 bytes

rate 0 bps

Class-map: managment (match-any)

0 packets, 0 bytes

offered rate 0 bps, drop rate 0 bps

Match: access-group name ax-qos_mgmt

0 packets, 0 bytes

rate 0 bps

Class-map: class-default (match-any)

0 packets, 0 bytes

offered rate 0 bps, drop rate 0 bps

Match: any

0 packets, 0 bytes

rate 0 bps

sho class-map

Class Map match-any citrix (id 1)

Match access-group name ax-qos_citrix

Class Map match-any class-default (id 0)

Match any

Class Map match-all voip-traffic (id 2)

Match access-group name ax-qos_voip-traffic

Class Map match-all voip-signaling (id 3)

Match access-group name ax-qos_voip-signaling

Class Map match-all voip-any (id 4)

Match access-group name ax-qos_voip-any

Class Map match-any managment (id 5)

Match access-group name ax-qos_mgmt

show policy-map

Policy Map ax-qos

Class voip-traffic

set dscp ef

police 128000 8000 exceed-action drop

Class voip-signaling

set dscp cs3

police 32000 8000 exceed-action policed-dscp-transmit

Class voip-any

set dscp default

police 32000 8000 exceed-action policed-dscp-transmit

Class citrix

set dscp af31

police 192000 8000 exceed-action policed-dscp-transmit

Class managment

set dscp cs2

police 192000 8000 exceed-action policed-dscp-transmit

Class class-default

set dscp default

police 5000000 8000 exceed-action policed-dscp-transmit

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
a.cruea1980 Thu, 01/03/2008 - 09:53

It looks like you have access-lists for your matching, but I see no access-lists shown for traffic to match to.

770801tvdhaar Fri, 01/04/2008 - 03:31

Yes ofcourse you right here is the access-lists configured

Extended IP access list ax-qos_citrix

10 permit tcp any any eq 2598

20 permit tcp any any eq 1494

Extended IP access list ax-qos_mgmt

10 permit tcp any any eq tacacs

20 permit tcp any any eq 22

30 permit tcp any any eq telnet

40 permit tcp any any eq 1680

50 permit tcp any any range 2701 2702

60 permit tcp any any eq 3389

70 permit udp any any eq snmp

80 permit udp any any eq snmptrap

90 permit udp any any eq 1645

100 permit udp any any eq 1646

110 permit tcp any eq 22 any

120 permit tcp any eq telnet any

130 permit tcp any eq 3389 any

140 permit udp any any range 2701 2702

150 permit udp any range 2701 2702 any

160 permit tcp any range 2701 2702 any

Extended IP access list ax-qos_voip-any

10 permit ip 172.20.0.0 0.0.31.255 any

Extended IP access list ax-qos_voip-signaling

10 permit tcp 172.20.0.0 0.0.31.255 any range 2000 2002

Extended IP access list ax-qos_voip-traffic

10 permit udp 172.20.0.0 0.0.31.255 any range 16384 32767

rseiler Sat, 01/05/2008 - 15:23

Is this a router or a switch? Can you send the 'show run' and 'show ver'?

rseiler Tue, 01/08/2008 - 00:38

That's what I thought. You can't use the 'show policy-map interface' commands on a Catalyst switch to get counters. Do a search on these forums for policy-map or qos counters on a Catalyst switch. Hint 'show platform'...

Actions

This Discussion