QoS on PPPoE setup.

Unanswered Question
Jan 3rd, 2008
User Badges:

Hello,

I'm trying to setup a QoS policy on my ADSL connection. I have a separate dsl modem in bridging mode (no cisco) and a 2800 router.


What I'm not sure about is if I should attach the service-policy to the Dialer interface of the actual physical Gi0/1 interface?


Most of the documents talk about ATM interfaces and they put the service-policy on the pvc, but I'm not able to find anything on the Ethernet.


Any suggestions?


Thank you,

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
paolo bevilacqua Thu, 01/03/2008 - 11:24
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Hi,


best would be for you to aquire an HWIC-1ADSL or WIC-1ADSL to connected directly the ADSL circuit and be guaranteed that everything works nicely.


However, if you cannot do that, here is a configuration example for a nested policy-map that first shapes and then applies priority:


http://www.cisco.com/en/US/tech/tk543/tk545/technologies_tech_note09186a00800b2d29.shtml


Hope this helps, please rate post if it does!



Actions

This Discussion