4402 Controller and Microsoft IAS

Answered Question
Jan 3rd, 2008

We recently installed a WLC 4402 and upgraded all of our standalone AP's to LWAPP's. Each of the previous AP's had an entry in IAS Radius. Can these be safely removed from IAS now? As far as I can see from the IAS logs, all authentication requests are received from the WLC only.

If I can remove them, it will allow me to add other Cisco devices to IAS since Microsoft sets a 50 client limit.

I have not been able to find a definitive answer to this in the documentation.

Correct Answer by steve.busby about 9 years 1 month ago

I don't have any link to this, but yes, you can remove the individual APs from your Radius server.

The authentication is now handled by the WLC and IAS Radius.

HTH

Steve

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Correct Answer
steve.busby Thu, 01/03/2008 - 15:04

I don't have any link to this, but yes, you can remove the individual APs from your Radius server.

The authentication is now handled by the WLC and IAS Radius.

HTH

Steve

Actions

This Discussion

 

 

Trending Topics - Security & Network