Solved: Failover --> Sending mail when switching

dimensyssrl · ‎01-04-2008

Hi all.

Anyone know if there is a way to send an email, to inform me that a couple of asa firewall in failover, has switched roles (active/standby)?

I've thought to write a bash script that send me a mail when it receive "Detected Active mate" from syslog, but this message appear in system context and it's not sent via syslog...

Thanks

Daniele

massimiliano.serafino · ‎01-04-2008

Hi,

From: PIX/ASA 7.x Active/Standby Failover Configuration Example http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml

View the paragraphs: Failover System Message and SNMP.

I hope this helps.

Massimiliano.

View solution in original post

massimiliano.serafino · ‎01-04-2008

Hi,

From: PIX/ASA 7.x Active/Standby Failover Configuration Example http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807dac5f.shtml

View the paragraphs: Failover System Message and SNMP.

I hope this helps.

Massimiliano.

dimensyssrl · ‎01-04-2008

Thanks a lot, this solve my problem ^__^

Daniele

massimiliano.serafino · ‎01-04-2008

You're welcome,

Massimiliano.