01-04-2008 08:14 AM - edited 03-15-2019 08:03 AM
Hi
How can i move the moh file to a remote router in call manager 5.1?
Any help please.
01-04-2008 08:37 AM
Take a look at the following link.
http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00802d1c31.html
Hope this helps. If so, please rate the post.
Brandon
01-07-2008 12:50 AM
Thank You for this pdf it was so useful for me but i have one more question.
Is there anyway to import the codec moh files from the callmanager 5.x?
In 4.x it was easy we can find them in this link C:\ProgramFiles\Cisco\MOH\moh.ulaw.wav
Can we do the anything to do that in call manager 5.x
Thanks
01-07-2008 06:58 AM
Not that I'm aware of. If it's the default MOH files, they should be on your installation disks. If it's custom MOH, you should have these files somewhere other than on the server.
Brandon
01-15-2008 10:28 AM
i tried the steps on the pdf file but when the hold button pressed no sound appear. Just silence.
what is the problem?
Please advice.
01-07-2008 01:46 AM
Thank You for this pdf it was so useful for me but i have one more question.
Is there anyway to import the codec moh files from the callmanager 5.x?
In 4.x it was easy we can find them in this link C:\ProgramFiles\Cisco\MOH\moh.ulaw.wav
Can we do the anything to do that in call manager 5.x
Thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide