01-05-2008 04:58 AM - edited 03-15-2019 08:03 AM
hi
I have installed the Ex Mob service in the VM environment....
when i try to log into the service i get a message that says
Error 100
login unsuccessful...
i have trouble shooted using the EM troubleshooting guide.....
i could not see any virtual directory under the IIS with name LoginService.....
please can anybody guide me???
01-05-2008 09:19 PM
Hi Mohammed,
Which version of CCM?
AD or DCD integrated?
I have seen this error in the past when URL is not properly configured and
you dont have #DEVICENAME# in the EM url
Please check the config guide depending on your version:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_0_1/ccmfeat/fsgd.pdf
Let us know
HTH
Gonzalo
01-05-2008 09:30 PM
Hi
I do have the proper configuration and also I have the DEVICENAME configured but still not working...
i tried to follow the troubleshooting guide ...... it says the virtual directory is not configured properly....however i do not see any virtual directory with the name 'LoginService'
01-05-2008 09:34 PM
Which version of CCM?
AD or DCD integrated?
You can try to enable EM traces if you are 100% sure config is ok.
And upload them I can take a look.
01-06-2008 02:24 AM
Hi
the version for the CCM is 4.2 and it is integrated into the defualt DC Directory...
i will try the EM traces today......
01-06-2008 08:42 AM
hi
pls find the traces
0: Jan 06 20:31:46.310 GST %EMApp-EMAPPSERVLET-7-UNK:TraceModule: Java vendor: Cisco version: ???
1: Jan 06 20:31:46.310 GST %EMApp-EMAPPSERVLET-7-UNK:CATLINA HOME:C:\PROGRA~1\Cisco\Tomcat
2: Jan 06 20:31:46.341 GST %EMApp-EMAPPSERVLET-7-UNK:C:\PROGRA~1\Cisco\Tomcat\userdev.ser (The system cannot find the file specified)
3: Jan 06 20:31:46.341 GST %EMApp-EMAPPSERVLET-7-UNK:Could not read hashtable from disc
4: Jan 06 20:31:46.466 GST %EMApp-EMAPPSERVLET-7-UNK:BEFORE CALLING INITIALIZE
5: Jan 06 20:31:46.482 GST %EMApp-6-UNK:Service URL from directory =http://CISCO/emservice/EMServiceServlet
6: Jan 06 20:31:46.482 GST %EMApp-6-UNK:Service URL=http://CISCO/emservice/EMServiceServlet Query URL=http://CISCO/emservice/EMServiceServlet
7: Jan 06 20:31:46.482 GST %EMApp-EMAPPSERVLET-7-UNK:AFTER CALLING INITIALIZE
8: Jan 06 20:31:46.497 GST %EMApp-EMAPPSERVLET-7-UNK:Could not get the device name. Probably configured as service URL. Trying with name
9: Jan 06 20:31:46.497 GST %EMApp-EMAPPSERVLET-7-UNK:Device Name: null
10: Jan 06 20:31:46.497 GST %EMApp-EMAPPSERVLET-7-UNK:Context:/emapp ::URI:/jsp/phone_error1.jsp
01-06-2008 08:45 AM
hi
i found it out...
i had the #DEVICENAME# configured as #devicename#......
i changed it and it is working fine...
thanks everybody for ur help....
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: