Dial plan procedure

Unanswered Question
Jan 7th, 2008
User Badges:

Hi, we have a Cisco 3845 Router. What is the commands to assign an Ephone-dn 1 (Ephone 2) to a specific telephone number 4410341 (Port 1/0/8). The following is a latest configuration. Thank you and waiting for assistance.


dial-peer voice 100 pots

numbering-type unknown

destination-pattern 05........

no digit-strip

port 3/0/0

!

ephone-dn 1

number 1000

label Secretary General

description 1000

name Secretary General

hold-alert 30 originator

!

ephone 2

device-security-mode none

mac-address 001D.A21A.046C

button 1:1

!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Brandon Buffin Mon, 01/07/2008 - 08:17
User Badges:
  • Purple, 4500 points or more

Do you want incoming calls on port 1/0/8 to go to ephone-dn 1? If so, enter the following commands:


voice-port 1/0/8

connection plar 1000


Or, do you want outbound calls from ephone-dn 1 to always use port 1/0/8? If so, take a look at the following link.


http://www.cisco.com/en/US/tech/tk652/tk90/technologies_configuration_example09186a00801bc341.shtml


Hope this helps. If so, please rate the post.


Brandon

Actions

This Discussion