UC 520 - 7941 voice issue (7940 ok & 7911)

craig.corbett · ‎01-07-2008

Hi, in my LAB setup I have a Cisco UC 520 with 3 phones, 7941, 7940 and a 7911.

Voice communications between 7940 and 7911 is fine. When I call the 7941 from the 7940 the phone rings but on pickup cant hear any voice communication at each end.

I'd appreciate any help I can get with this.

Thanks,

Craig.

paolo bevilacqua · ‎01-07-2008

Which FW do you have on the 7941? Have you configured "type" for all ephones ?

craig.corbett · ‎01-09-2008

Hi,

In reference to the 7941 in my config I have:

tftp-server flash:cmterm-7941-7961-sccp.7.0.3.tar

load 7941GE TERM41.7-0-3-0S

load 7941 TERM41.7-0-3-0S

Phone Config:

ephone 6

device-security-mode none

mac-address 001B.2A20.2ECC

type 7941

button 1:11

!

ephone-dn 11 dual-line

number 202 no-reg primary

label 202

call-forward busy 501

call-forward noan 501 timeout 10

corlist incoming user-domestic

translation-profile incoming CallBlocking

!

Hope this helps ?