01-07-2008 06:24 AM - edited 03-15-2019 04:57 AM
hi,
is it possible to use the Cisco IP Phone 7914 Expansion Modul with CCME 4.0 or can i use it only with CCM?
thx
Solved! Go to Solution.
01-07-2008 07:51 AM
Hi Konrad,
The use of the 7914 with CME has been supported since around CME 3.1 :) Here is the info for CME 4.0;
http://www.cisco.com/en/US/customer/docs/voice_ip_comm/cucme/requirements/guide/cme40spc.html
Hope this helps!
Rob
01-07-2008 07:51 AM
Hi Konrad,
The use of the 7914 with CME has been supported since around CME 3.1 :) Here is the info for CME 4.0;
http://www.cisco.com/en/US/customer/docs/voice_ip_comm/cucme/requirements/guide/cme40spc.html
Hope this helps!
Rob
01-09-2008 02:56 AM
hi rob,
thx for your answer.
Konrad.
01-09-2008 06:30 AM
Hi Konrad,
You are most welcome!
Take care,
Rob
01-09-2008 04:02 PM
FYI - The 7914 is only supported with the 796X or 797X handsets. You can't use it on the 794X series phones.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: