01-07-2008 12:22 PM - edited 03-05-2019 08:19 PM
C3750 switch fails post with the following-
Waiting for Stack Master Election (around 30 seconds)...
POST: PortASIC CAM Subsystem Tests : Begin
TCAM (asic:4) walking-one test failed
Write: 80_00000000_01000000-00_00000000_00000000
Read: 80_00000000_01800000-00_00000000_00000000
POST: POST Failed
POST: PortASIC CAM Subsystem Tests : End, Status Failed
POST: CAM test failed
POST Failed: disabling stack links and shutting down SDP
driver class subsystem initialization failed
!!! WARNING: The switch is not usable !!!
Unable to create l2trace server process, socket_open() failed
any informayion on the causes of this?and is their a remedy?
01-07-2008 12:38 PM
andrew
Based on these error messages I would believe that the problem was a hardware error in the switch. I believe that the appropriate thing to do is to open a case with Cisco TAC about this.
HTH
Rick
01-11-2008 02:02 AM
Thanks very much,case opened with TAC and all sorted.
04-03-2008 02:59 PM
Hello. I'd like to know what was the reply you had from CISCO and how you solved this issue? By the way I am experiencig the same problem:
Waiting for Stack Master Election (around 30 seconds)...
POST: PortASIC CAM Subsystem Tests : Begin
TCAM (asic:1) walking-one test failed
Write: 80_00000000_00000000-00_00000000_10000000
Read: 80_FFFFFFFF_00000000-00_00000000_10000000
POST: POST Failed
POST: PortASIC CAM Subsystem Tests : End, Status Failed
.
.
.
"Switch is unusable!"
Thanks, Douglas.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: