01-07-2008 03:22 PM
Hi,
Installing LMS 3.0 for a client on Windows 2003.
Customer is used to seeing graphs for basic network utilisation (bits in/out, errors in/out, unicast packets in/out) from tools like Cacti & MRTG.
Where do i go in LMS 3.0 to find graphs? I have setup the devices and they are managed in DFM, CM etc. C
Solved! Go to Solution.
01-07-2008 03:37 PM
This is not possible with stock LMS. As of LMS 3.0.1 (patches released a few weeks ago to Cisco.com) there is a new LMS add-on called the Health and Utilization Monitor. You will need to purchase a license for this component, but you get a 90 day demo with LMS 3.0.1. HUM will allow you to do many of the graphing functions that MRTG and Cacti provide. The 3.0.1 patch can be downloaded from http://www.cisco.com/cgi-bin/tablebuild.pl/lms301 .
01-07-2008 03:37 PM
This is not possible with stock LMS. As of LMS 3.0.1 (patches released a few weeks ago to Cisco.com) there is a new LMS add-on called the Health and Utilization Monitor. You will need to purchase a license for this component, but you get a 90 day demo with LMS 3.0.1. HUM will allow you to do many of the graphing functions that MRTG and Cacti provide. The 3.0.1 patch can be downloaded from http://www.cisco.com/cgi-bin/tablebuild.pl/lms301 .
01-08-2008 02:34 AM
do we have something in LMS 2.6 ? Or would i need to purchase 3.0 to get benefit of HUM....???
01-08-2008 09:02 AM
You need to purchase LMS 3.0 to get HUM.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: