Configuring 7921 on CCME and Autonomous 1242 AP

Anthony Mile · ‎01-07-2008

Hi guys! Trying to configure AP1242 for CCME and 7921 Ip Phone. I have done all necessary on CCME and on the AP have created a voice vlan as required but in vain. the phone keeps on saying "locating network services". My CCME is version 3.

Please help guys where am going wrong.

Anthony

Rob Huffman · ‎01-08-2008

Hi Anthony,

Just a quick check, support for the 7921G was not added until CME 4.1.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/command/reference/cme_l1ht.html#wp1016796

Hope this helps!

Rob

migilles · ‎01-08-2008

Locating network services means the phone is unable to find an AP / network for which the 7921G is configured for.

The SSID is case sensitive and ensure no spaces at the end.

Would suggest to use open authentication for now, then can go from there.

See the 7921G Design Guide for more info @

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/wip7921/7921dply.pdf.

Anthony Mile · ‎01-08-2008

Hi Guys,

One clarification, Can i use the ce500 for wireless. I have connected the AP to ce500 switch then to the call manager router.

Thanks