I am trying to route all traffic (including Internet traffic) through a VPN connection from a remote office back to the main office using a 871 router to a 3000 Concentrator. The problem I have is in setting up the "local network" on the Concentrator. I have tried 0.0.0.0/0.0.0.0 but that does not transfer any traffic at all. The tunnel comes up, but no traffic is transferred. If I setup just the 2 networks then I can transfer between the 2 networks, but I want all Internet traffic, etc. to also go through the tunnel from the remote site (partly becuase there is a web filtering appliance at the home office.) Does anyone know how to do this with a Concentrator? Thank you.