01-08-2008 09:19 AM - edited 07-03-2021 03:11 PM
I currently have 2 2106 wlc's.
Each is licensed for 6 access points. Controller 1 is full. Controller 2 has 5/6 aps.
When I add the 12th access point it repeatedly attempts to connect to controller 1. It never tries to connect to controller 2.
In the ap config I have specified the names of the primary and secondary controllers.
Primary - Controller_2
Secondary - Controller_1
Shouldn't this force the ap to attempt to connect to Controller_2?
01-08-2008 09:55 AM
Hi Adam,
Can you try setting WLC # 2 into "Master Controller" mode?
Hope this helps!
Rob
01-08-2008 10:06 AM
Thanks Rob.
Turns out I had to set each controller in the same Mobility Group and add each others MAC/IP addresses into the Mobility Group Members. It now appears to use the primary controller first.
01-08-2008 01:33 PM
Hi Adam,
Nice work! All the best to you in 2008 :)
Take care,
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide