I have an issue with MGCP. I have a centralized sub and a pub, and multiple remote sites.
When adding MGCP gateways using FXO or FXS ports, the ports will not register. If I manually put in the dial-peer voip (999020 example), the register. Also, when making changes on the gateway ports, I have to do a no MGCP for the change to take effect.
This is happening on all new sites as I create the gateways. Please advise.
Sample config:
ccm-manager fallback-mgcp
ccm-manager redundant-host 10.216.11.50 10.216.1.50
ccm-manager mgcp
no ccm-manager fax protocol cisco
ccm-manager music-on-hold
ccm-manager config
!
mgcp
mgcp call-agent 10.216.11.50 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
no mgcp package-capability res-package
no mgcp package-capability fxr-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp rtp payload-type g726r16 static
!
mgcp profile default
