sajan1234 Wed, 01/16/2008 - 11:33
User Badges:

Dear Tim,


It was connected with Active Firewall & working fine, now it has given this internal error.Please find my attached booting sequence.


An internal error occurred. Specifically, a programming assertion was

violated. Copy the error message exactly as it appears, and get the

output of the show version command and the contents of the configuration

file. Then call your technical support representative.


assertion "result" failed: file "crypto_nist_tests.c", line 406


Thread Name: initpix/intf1 (Old pc 0x001162e1 ebp 0x00ddb9d0)


Traceback:

0: 004bb6a5

1: 002fb7d6

2: 002e87a8

3: 002e88ac

4: 001036dd

5: 00000000

vector 0x00000003 (breakpoint)

edi 0x002fb6c8

esi 0x00000196

ebp 0x00ddba40

esp 0x00ddba34

ebx 0x002fb6cf

edx 0x000003fd

ecx 0x0000000a

eax 0x00000040

error code n/a

eip 0x004befb4

cs 0x00000008

eflags 0x00000246

CR2 0x00000000

Stack dump: base:0x00dd9b3c size:8192, active:392

0x00ddbb38: 0x00000001

0x00ddbb34: 0x002e8844

0x00ddbb30-0x00ddbb2c: 0x00000000

0x00ddbb28-0x00ddbb0c: 0x12345678

0x00ddbb08: 0x00000001

0x00ddbb04: 0x001036dd

0x00ddbb00: 0x00ddbb2c

0x00ddbafc-0x00ddbaec: 0x12345678

0x00ddbae8: 0x00000000

0x00ddbae4-0x00ddbae0: 0x12345678



sajan1234 Sun, 01/27/2008 - 05:39
User Badges:

Dear All,


Any update on this issue, i am surprised to see this messege when my failover box boots, it is continiously booting with out stopping.

manjesin Sun, 01/27/2008 - 08:12
User Badges:

Hi Sajan,


I believe you got VAC+ card connected to PIX515E See removing the vac+ card fix the issue .


traceback indicate the vac+ card was the issue for crashinfo ..


There is a junk bug filed in 6.3.1 ..not sure you have access to that bug tool or not


CSCec50850

Here is link for bug tool kit

http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs


If removing the VAC+ card resolve the issue .. its gr8 else see software upgrade helps..otherwise.. hardware issue


Pls rate it helps your issue to resolve to that other can take benefit of this forum


Thanks

jojuarez Mon, 01/28/2008 - 15:57
User Badges:

Hi,


The bug the other user mentioned is junked, so it is not that bug.


I noticed that you're running a very old version, please do an upgrade at least to 6.3.5 as several defects have been fixed since then.

Actions

This Discussion