01-09-2008 01:49 AM
under RME - tools - syslog I've changed "Config fatch" automated action to e-mail. How can I revert it back to config fatch type?
01-09-2008 06:35 AM
You have a couple of options and both are done under RME - Tools - Syslog - Automated Actions
1) Select the Config Fetch action and disable
2) Select the Config Fetch action and select edit it and remove the fields in under email
01-09-2008 08:05 AM
hi
1) does not work. It is still e-mail type after disable/enable
2) cannot do it because e-mail addr must be entered
01-09-2008 08:47 AM
If you change the type, you cannot change it back easily. This is known bug CSCsl60532. You will need to open a TAC service request to get the workaround instructions.
01-09-2008 08:49 AM
:-))) great. An can I create new one that would be ok?
01-09-2008 09:21 AM
No, you cannot create a new one. The inventory collect and config collection tasks are reserved for the system.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide