Outgoing caller ID on FXO ports

Unanswered Question
Jan 9th, 2008
User Badges:

Is there a way to specify caller ID outgoing on FXO ports in CME or is that just controlled by the phone company? I have someone that wants people they call to see their main number whichever FXO port they call from instead of the number for each of the individual analog lines.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Rob Huffman Wed, 01/09/2008 - 07:14
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Brian,

Yes, this is something that is set by the Telco Provider.

Hope this helps!


mpitts Tue, 01/15/2008 - 07:55
User Badges:

You may also be able to add the following command to your outbound dial peer(s)-

clid network-number xxxxxxxxxx (your main number)

In some cases the Telco may not accept it, but if they do it works fine.


paolo bevilacqua Tue, 01/15/2008 - 08:16
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

But this doesn't work for FXO (analog) lines.

Just like you will never be able to change the caller-id to show when you call from home.


This Discussion