Hi,
We have a LNS which is connecting to our partners LAC. I've been mandated to provide password authentication for this connection. Looking online, all that I see is authentication for the users that will be using the LAC/LNS connection. But... I don't see a way to authenticate the LAC itself. This is a working tunnel currently, with no password for the LAC/LNS connection.
Here's our config:
vpdn-group VZ
accept-dialin
protocol l2tp
virtual-template 1
terminate-from hostname VZWLAC
source-ip 216.x.x.254
local name GC
l2tp tunnel framing capabilities all
l2tp tunnel bearer capabilities all
ip pmtu
ip mtu adjust
interface Virtual-Template1
ip unnumbered Loopback0
ip mtu 1400
ip policy route-map clear-df
peer default ip address pool guamcell
no keepalive
ppp authentication chap
ppp ipcp dns 63.x.x.20 63.103.50.17
Thanks!
Lisa G