Problem with traffic passing through a vlan at Layer 2

kevinhobson2000 · ‎01-09-2008

Hi i have a problem with traffic passing through a specific Vlan details below:

The background to this is that traffic in one vlan keeps stopping. The fix for this has been to suspend the vlan (44) in the layer 2 part of the 6500 chassis, but this keeps reoccurring. I am a bit stumped as to why and now the switch has been rebooted and its still occurring.

I have checked the logs and have done a bug scrub and can see nothing that could have caused this issue.

Thanks

Kev

Juan Carlos Arias Perez · ‎01-09-2008

What is your layer 3 devices config??

kevinhobson2000 · ‎01-17-2008

Please find the Layer 3 RP config attached.

Thanks

Kev

Juan Carlos Arias Perez · ‎01-17-2008

Seems to be right, did you try debuging IPX issue?? Is there an IPX server on VLAN 44 that you could monitor your problem??

Juan Carlos Arias Perez · ‎01-17-2008

Check if your IOS version does not have a bug with IPX or some other service you are running, you can check this here:

http://www.cisco.com/cgi-bin/Support/Bugtool/launch_bugtool.pl

Hope this helps

Juan Carlos Arias