Unable to External Redirect with wired WLAN

gudmundurk · ‎01-09-2008

Hello,

I'm not sure if this is a bug in the GUI or Software I have trid this in both GUI and CLI.

I'm trying to redirect a Wired WLAN to an external Web-Auth server, I'm already doing so successfully with the Wireless lan.

Here is the process :

Wlans -> [WLAN ID] -> Security -> Web Authentication > tick Over-ride Global Config -> Select External (redirect to external server) insert URL and click APPLY.

The problem is that when I press Apply and check you the settings again there has been no change, so I'm still being re-directed to the internal global server.

Anyone had this problem and have a solution for me ?

Thank in advance.

Gudmundur

irisrios · ‎01-16-2008

I suppose you are using a controller for redirection. If that is the case check the following URL and see if the configurations are right. Refer http://cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00808ed026.shtml#wirguest

gudmundurk · ‎01-17-2008

I was able to configure this in the WCS when I finshed connecting the controller to the WCS.

It's quite odd.