The interface 0/0 is not in full duplex mode WAE-7326

Unanswered Question
Jan 9th, 2008
User Badges:
  • Silver, 250 points or more

have configured the WAE7326 as a Central manager, so no inline. interfaces, running ver 4.0.9.b.10 comes up with the above message,

now what is interface 0/0 as only have gi 1/0 and 2/0, 2/0 is shutdown, and the primary inreface 1/0 is connected to a gigabit port on the 6500 and doing a sh int says running 1000Mbps and full duplex on the switch and the WAE 7326

anybody now how tofix this error message?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Zach Seils Wed, 01/09/2008 - 17:48
User Badges:
  • Cisco Employee,

Richard,


What you are seeing is a defect. See CSCsi42714 for more information. This is fixed in the 4.0.13 release.


Zach

Richard Bradfield Wed, 01/09/2008 - 18:30
User Badges:
  • Silver, 250 points or more

Zach,

Is it worth upgrading to 4.0.13 or should I go straight to 4.0.15?

Zach Seils Wed, 01/09/2008 - 21:59
User Badges:
  • Cisco Employee,

It's hard to say without knowing the specifics of your deployment. In general we recommend that you run the latest version, but adequate lab validation and testing should be done first.


Regards,

Zach



Actions

This Discussion