Listing / Removing clients from "Client Exclusion Policies"

Answered Question
Jan 10th, 2008

Hello.

Due to "Excessive 802.11 Association Failures" and "Excessive 802.11 Authentication Failures", I have some users that cannot connect anymore to the WLC system.

Is there a list of these "excluded" clients ??

How can I remove one of these "excluded" clients from that list??, i.e. un-exclude them

Thanks.

I have this problem too.
0 votes
Correct Answer by milan_simcik about 7 years 2 months ago

Hi Marcelo,

in WCS menu Monitor-clients click on new search (left tab) and choose from drop-down menu (All exluded Client). List of excluded clients will occure. If you click to a given excluded client you can from drop-down menu remove that client from exclusin list.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (2 ratings)
rob.huffman Thu, 01/10/2008 - 05:30

Hi Marcelo,

Exclusion List (Blacklist) Client Feature

If a client is not able to connect to an access point, and the security policy for the WLAN and client are correct, the client has probably been disabled. In the controller GUI, you can view the client's status on the Monitor > Summary page under Client Summary. If the client is disabled, click Remove to clear the disabled state for that client. The client automatically comes back and, if necessary, reattempts authentication.

Hope this helps!

Rob

maraboli Thu, 01/10/2008 - 06:13

Hi Rob

Thanks for the pointer, I was looking for these options under the WCS, not the Controller itself.

This should be available in WCS as well, right ? (if not, what's the point in having a WCS?)

These things are not mentioned in the "online HELP".

Thanks for your response and time.

best regards,

Correct Answer
milan_simcik Mon, 02/11/2008 - 00:51

Hi Marcelo,

in WCS menu Monitor-clients click on new search (left tab) and choose from drop-down menu (All exluded Client). List of excluded clients will occure. If you click to a given excluded client you can from drop-down menu remove that client from exclusin list.

maraboli Thu, 02/28/2008 - 07:31

Thanks !

problem solved!

weymannpe Mon, 06/02/2008 - 23:29

Hi all,

I'm using WCS version 5.0.56.0.

I can see an entry under "Monitor" security tab, so i can remove the client (so far so good).

But if I use the search as Marcelo described, I never get an entry.

Does anyone of you have the same problem?

Did I make something wrong?

Thanks!

Best regards,

Peter

Actions

Login or Register to take actions

This Discussion

Posted January 10, 2008 at 5:05 AM
Stats:
Replies:5 Overall Rating:4.5
Views:4058 Votes:0
Shares:0
Tags: No tags.
 

Discussions Leaderboard

Rank Username Points
1
Scott Fella
3,345
2
Stephen Rodriguez
1,515
3
George Stefanick
1,322
4
Leo Laohoo
800
5
Manannalage ras...
671
Rank Username Points
George Stefanick
38
Manannalage ras...
25
V B
23
Scott Fella
20
Freerk Terpstra
18

Trending Topics - Security & Network