01-10-2008 05:46 AM - edited 03-03-2019 08:12 PM
Any body can help me with this?
I haven't experience in this
01-10-2008 05:48 AM
Do u mean upgrade from CatOS to native IOS?
If Yes here you go.
Read it carefuly before start on.
http://www.cisco.com/en/US/products/hw/switches/ps708/products_tech_note09186a008015bfa6.shtml
Best Regards,
Mounir Mohamed
01-10-2008 05:51 AM
No, we already have IOS.
But I'm afraid to upgrade it, 'cause of that mess with Switch and Route Processors, MSFS, and so on
01-10-2008 05:56 AM
Well, you are in better situation than what i was suggest, moving from CatOS to IOS is painful than upgrading from IOS to another IOS image or feature set,
Check this out:
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00801347e2.shtml
Best Regards,
Mounir Mohamed
01-10-2008 05:54 AM
Hi AAshih,
If you have 2 sups in your chassis an you want to upgrade the 2 at a same time please find this link
If you just jave one sup running IOS image on your box please use this link
http://www.cisco.com/warp/public/473/161.html#maintask2
Please read the links carefully before you start upgrade and incase you are stuck somewhere please come back with your doubts before you start upgrade.
HTH
Ankur
*Pls rate all helpfull post
01-10-2008 07:14 AM
Thank you
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: