cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
835
Views
0
Helpful
3
Replies

Upgrade Paths for Ciscoworks.

wwanjohi123
Level 1
Level 1

If i need to upgrade my LMS 2.5 to a higher vesion, do i need to purchase? what about the updates? I need to resolve the issue of accessing devices using SSH on RME.

1 Accepted Solution

Accepted Solutions

David Stanford
Cisco Employee
Cisco Employee

You can upgrade to LMS 2.6 for free at the following link, provided you have access:

http://www.cisco.com/kobayashi/sw-center/cw2000/lan-planner.shtml

There is a cost associated with going to LMS 3.0 though, so you might want to contact your account rep or reseller about the cost.

View solution in original post

3 Replies 3

David Stanford
Cisco Employee
Cisco Employee

You can upgrade to LMS 2.6 for free at the following link, provided you have access:

http://www.cisco.com/kobayashi/sw-center/cw2000/lan-planner.shtml

There is a cost associated with going to LMS 3.0 though, so you might want to contact your account rep or reseller about the cost.

Thanks alot.

miheg
Level 5
Level 5

LMS 2.5 can manage your devices via SSH.

To access the devices via SSH you may also need to upgrade the devices involved. Newer IOS, more RAM, more flash, configuration changes and downtime for implementation.

SSH access is not just a management side thing, in fact getting all devices SSH ready, might be even more expensive then the LMS upgrade.

Cheers,

Michel

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: