VoIP Lab-Router Setup

Unanswered Question
Jan 11th, 2008
User Badges:

Can you run SDM and CME 3.0 both on a Cisco 3640 with internal 64M flash and 128M RAM, plus 20meg external flash card? Plus any configuration documentation would be helpful?

Thanks in Advance.

DTA

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 1 (1 ratings)
Loading.
hadbou Thu, 01/17/2008 - 09:23
User Badges:
  • Bronze, 100 points or more

Cisco Unified Communications Express is an award-winning IP communications solution that is provided with the Cisco Integrated Services Router portfolio. Cisco Unified Communications Express includes:


"Cisco Unified CallManager Express to provide rich call processing


"Cisco Unity Express to provides integrated messaging with an AIM or NM module


"Full portfolio of IP phones to meet the small medium business needs


"Full-featured voice over IP (VoIP) capability to support H.323 and Session Initiation Protocol (SIP) implementations


"Voice gateways supporting VG224 and analog telephone adaptors (ATA)


http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/intro.html

paolo bevilacqua Fri, 01/18/2008 - 13:57
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

Please stop posting pasted text that is irrelevant to the question asked.

pcameron Fri, 01/18/2008 - 16:35
User Badges:
  • Cisco Employee,

Completely agree about irrelevant posts!


Cisco SDM is a web-based configuration tool that allows you to configure LAN and WAN interfaces, routing, Network Admission Control (NAC), Network Address Translation (NAT), firewalls, Intrusion Prevention System (IPS), Virtual Private Networks (VPNs), and other features on the router.


SDM will run on the 3640. Refer here for release notes -


http://www.cisco.com/en/US/products/sw/secursw/ps5318/prod_release_note09186a0080881a96.html#wp34937


For the 3640 router, you will need -


12.2(11)T6 or later releases

12.3(2)T or later releases

12.3(1)M or later releases

12.3(4)XD

12.2(15)ZJ3

12.4(2)T or later releases


64 meg flash and 128 meg DRAM should be fine !


Some config guides are here -


http://www.cisco.com/en/US/products/sw/secursw/ps5318/prod_configuration_examples_list.html


SDM does not do any voice configurations. Since you are talking about CME 3.0 (or later) then you can use the CME GUI and CLI to configure the voice features. Refer here for configuration details -


http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.html



Actions

This Discussion