01-11-2008 09:17 AM - edited 03-15-2019 08:10 AM
Can you run SDM and CME 3.0 both on a Cisco 3640 with internal 64M flash and 128M RAM, plus 20meg external flash card? Plus any configuration documentation would be helpful?
Thanks in Advance.
DTA
01-17-2008 09:23 AM
Cisco Unified Communications Express is an award-winning IP communications solution that is provided with the Cisco Integrated Services Router portfolio. Cisco Unified Communications Express includes:
"Cisco Unified CallManager Express to provide rich call processing
"Cisco Unity Express to provides integrated messaging with an AIM or NM module
"Full portfolio of IP phones to meet the small medium business needs
"Full-featured voice over IP (VoIP) capability to support H.323 and Session Initiation Protocol (SIP) implementations
"Voice gateways supporting VG224 and analog telephone adaptors (ATA)
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/intro.html
01-18-2008 01:57 PM
Please stop posting pasted text that is irrelevant to the question asked.
01-18-2008 04:35 PM
Completely agree about irrelevant posts!
Cisco SDM is a web-based configuration tool that allows you to configure LAN and WAN interfaces, routing, Network Admission Control (NAC), Network Address Translation (NAT), firewalls, Intrusion Prevention System (IPS), Virtual Private Networks (VPNs), and other features on the router.
SDM will run on the 3640. Refer here for release notes -
http://www.cisco.com/en/US/products/sw/secursw/ps5318/prod_release_note09186a0080881a96.html#wp34937
For the 3640 router, you will need -
12.2(11)T6 or later releases
12.3(2)T or later releases
12.3(1)M or later releases
12.3(4)XD
12.2(15)ZJ3
12.4(2)T or later releases
64 meg flash and 128 meg DRAM should be fine !
Some config guides are here -
http://www.cisco.com/en/US/products/sw/secursw/ps5318/prod_configuration_examples_list.html
SDM does not do any voice configurations. Since you are talking about CME 3.0 (or later) then you can use the CME GUI and CLI to configure the voice features. Refer here for configuration details -
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide