Setting up PIX 501 for Cisco VPN Clients

Unanswered Question
Jan 11th, 2008
User Badges:

I am setting up Remote access for employees to access companies network. I followed the configuration guide for Cisco to configure the PIX. I was wondering if someone could check my work to see if I missed anything. I am having problems connecting from remote location with error code 412. I researched the issue and turned off firewalls at remote location.

Here is the hardware that I am using.


Adtran 3200 - Pix 501


DSL - Dlink 504

I also attached the PIX config file.

Any help is much appreciated!!!

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
acomiskey Tue, 01/15/2008 - 10:03
User Badges:
  • Green, 3000 points or more

Your nat exemption acl is backwards...

access-list 101 permit ip

should be...

access-list 101 permit ip

lan_consultant Tue, 01/15/2008 - 10:31
User Badges:

Thanks alot. I take it that every thing else looks good?

I still am unable to connect. I believe that our Adtran 3200 is blocking traffic.


This Discussion