01-11-2008 01:17 PM - edited 02-21-2020 01:51 AM
I am setting up Remote access for employees to access companies network. I followed the configuration guide for Cisco to configure the PIX. I was wondering if someone could check my work to see if I missed anything. I am having problems connecting from remote location with error code 412. I researched the issue and turned off firewalls at remote location.
Here is the hardware that I am using.
Office:
Adtran 3200 - Pix 501
Remote:
DSL - Dlink 504
I also attached the PIX config file.
Any help is much appreciated!!!
01-15-2008 10:03 AM
Your nat exemption acl is backwards...
access-list 101 permit ip 192.168.2.0 255.255.255.0 192.168.1.0 255.255.255.0
should be...
access-list 101 permit ip 192.168.1.0 255.255.255.0 192.168.2.0 255.255.255.0
01-15-2008 10:31 AM
Thanks alot. I take it that every thing else looks good?
I still am unable to connect. I believe that our Adtran 3200 is blocking traffic.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide