01-12-2008 06:12 AM
Dear all,
I have the scenario where CE is connecting to PE with one serial interface and have multiple DLCIs. Each DLCI is assigned to seperate VRF on PE.
Now my question is how to control priority between each DLCI, for example, appA on dlci 100 might need high priority from appB on dlci200 that are on diffent VRF.
Thanks,
Monty
01-13-2008 01:33 AM
I beleive FRTS neasted with policy-map can solve your issue.
01-16-2008 12:21 PM
Monty,
you may want to take a look at fram-realy dlci prioritization on an interface command.
interface serial4.1 multipoint
ip address 172.16.1.1 255.255.255.0
frame-relay priority-dlci-group 3 200 210 300 300
frame-relay priority-dlci-group 4 400 410 410 410
frame-relay interface-dlci 200
frame-relay interface-dlci 400
Here is the command reference.
HTH-Cheers,
Swaroop
01-17-2008 06:04 AM
Thanks for reply, I am wondering if this feature can apply to DLCI on different subinterface? I have not lap it up yet.
Cheers,
Monty
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: