cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
328
Views
0
Helpful
1
Replies

ASA 5510 SSL VPN Load Balancing

john.cooper
Level 1
Level 1

I have a question regarding the load-balancing and SSL Certificates. I have 2 ASA's uk1 and uk2. I then set up the cluster ip address and assign this as Web in DNS. I have then got a certificate for each asa (uk1 and Uk2) and a certificate for web. I've then set the ASA to redirect to the FQDN. When I assign the Certificate "Web" to the outside interface, users get a warning (that the wrong servername is being used) when they are re-directed to the Uk1 or UK2. If I out the Uk1 or UK2 certificate on the Outside interface I get a warning when users go to Web (again that the wrong servername is being used). Any ideas how I can get around this?

Thanks

JC

1 Reply 1

john.cooper
Level 1
Level 1

Ahh Found the answer under the question:

Services: ASA 8.0 VPN cluster with WEBVPN and Certificates

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: