01-12-2008 10:12 AM - edited 03-18-2019 08:19 PM
What do you need to configure in CCM 6.X in order to make the SPBLF to show the status of the call ?
if you could point me to a doc. I'll appreciated it
Solved! Go to Solution.
01-12-2008 11:10 AM
Hi Cris,
Here is some reference material;
Cisco Unified CallManager Features and Services Guide
Check under Presence Section
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmfeat/fsgd.pdf
Good note from Arief;
Hope this helps!
Rob
01-12-2008 11:10 AM
Hi Cris,
Here is some reference material;
Cisco Unified CallManager Features and Services Guide
Check under Presence Section
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmfeat/fsgd.pdf
Good note from Arief;
Hope this helps!
Rob
01-12-2008 11:59 AM
It was very useful, I just have a question.
What do I need to put in the Subscribe CSS
what partitions, do I need to configure a special partition or just add the partition that all of my lines have assigned.
I think that's the only thing I'm missing. its not working yet
thank you for your quick assistance
01-12-2008 12:11 PM
It is working, the information provided was very useful
you're the man
01-12-2008 03:35 PM
Hi Cris,
Thanks man!
Nice work here my friend! It's always a good day when we get something working :) This is one of the nicer new CCM features.
Take care,
Rob
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide