General Question from forum

Unanswered Question
Jan 13th, 2008

where will i get a general understanding on how to make two net/subnets that communicate together which reside on the same router 2811.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ohassairi Sun, 01/13/2008 - 23:20

conf t

interface fast 0/0

ip address 192.168.1.1 255.255.255.0

no shut

exit

interface fast 0/1

ip address 192.168.2.1 255.255.255.0

no shut

exit

then connect a PC to fast 0/0 (if directly use cross cable) and give it the IP 192.168.1.2 255.255.255.0 gateway: 192.168.1.1

then connect a PC to fast 0/1 (if directly use cross cable) and give it the IP 192.168.2.2 255.255.255.0 gateway: 192.168.2.1.

both computer should be able to ping each other

Actions

This Discussion