01-13-2008 01:59 PM - edited 03-05-2019 08:26 PM
where will i get a general understanding on how to make two net/subnets that communicate together which reside on the same router 2811.
01-13-2008 09:26 PM
hi,
Anything regarding 2800 series integrated service routers you can find it out here:
http://www.cisco.com/en/US/products/ps5854/tsd_products_support_series_home.html
HTH,
regards,
shri :)
01-13-2008 11:20 PM
conf t
interface fast 0/0
ip address 192.168.1.1 255.255.255.0
no shut
exit
interface fast 0/1
ip address 192.168.2.1 255.255.255.0
no shut
exit
then connect a PC to fast 0/0 (if directly use cross cable) and give it the IP 192.168.1.2 255.255.255.0 gateway: 192.168.1.1
then connect a PC to fast 0/1 (if directly use cross cable) and give it the IP 192.168.2.2 255.255.255.0 gateway: 192.168.2.1.
both computer should be able to ping each other
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: