VLAn and VTP configuration..

Unanswered Question
Jan 13th, 2008
User Badges:


Hi can you please check if my configuration below is correct or do you have any suggestion?


I have 3550 and 1 2960, the 2960 will connect on 3550 using VTP and with VLAn configuration. please check below my config.


3550 configuration


config t

vtp domain cisco.com

vtp passord cisco

vtp mode server


config t

int vlan 2

ip address 153.117.183.1 255.255.255.240

no shut

end


config t


int fa0/48

switch port trunk encapsulation dot1q switchport mode trunk

exit


2960 configuration


config t

vtp domain cisco.com

vtp passord cisco

vtp mode client


config t

int vlan 2

ip address 153.117.183.2 255.255.255.240

no shut

end


config t

vlan 2

name WIP_clients

exit


config t

int fa0/3

switchport mode access

witchport access vlan2

end

int fa0/4

switchport mode access

switchport access vlan2

end

int fa0/5

switchport mode access

switchport access vlan2

end

int fa0/6

switchport mode access

switchport access vlan2

end


config t


int fa0/1

switch port trunk encapsulation dot1q

switchport mode trunk

end



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
glen.grant Sun, 01/13/2008 - 18:25
User Badges:
  • Purple, 4500 points or more

Make sure you make the layer 2 bvlan on the 3550 also , besides that it looks like it should work . Myself I would make the links with this command and let the switches negotiate the trunks.


switchport mode dynamic desirable on the connecting links.

iceman0813 Sun, 01/13/2008 - 18:32
User Badges:

what do you mean? is thay correct to use swithcport mode trunk on both 3550 and 2960 switch?


thanks again

glen.grant Sun, 01/13/2008 - 18:40
User Badges:
  • Purple, 4500 points or more

Yes you can use that also or the way I stated , which is "switchport mode dynamic desirable" instead of switchport mode trunk. Either way will work .

Actions

This Discussion