01-13-2008 06:48 PM - edited 03-05-2019 08:27 PM
Hi NetPro,
i got this logs from the core-switch : %SPANTREE-7-PORTDEL_FAILNOTFOUND: 3/16 in vlan 130 not found (telnet145) . but, VLAN 130 still in the Core-switch .
i wonder what does this means.
your reply will be highly appreciated.
thanks.
regards,
Jack
01-13-2008 08:41 PM
I have seen this on Catos before, but it was normal and was to do with etherchannel it turns out- associated with the port coming up.
Is it causing problems
01-14-2008 01:23 AM
Hi Jack,
I believe port 3/16 was configured for vlan 130 which is been removed now. Can you check the config for port 3/16 and update?
The message indicates a port was deleted from a VLAN via a telnet session. telnet145 is the telnet process ID.
You are seeing these messages because you have set the spantree logging level to 7 (which will generate informational messages). Default for spantree is 5 and can be changed using "set logging level spantree 5 default".
HTH
Ankur
*Pls rate all helpfull post
01-14-2008 05:04 AM
Hi Ankur,
yes, i configured spantree logging level to 7.
but, the Vlan 130 still in the interface fa 3/16. even i show vlan i still able to see vlan 130 in the vlan database.
any idea ?
thanks.
regards,
Jack
01-14-2008 05:50 AM
Hi Jack,
Did you login to this box using vlan 130? Is fa3/16 is the only interface configured for this vlan? Did anyone tried enabling or disabling this port or changing this port config?
Regards,
Ankur
01-14-2008 05:53 AM
Hi Ankur,
nope, that's why i wondering what happened and what went wrong.
thanks.
Jack
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: